A review on China's wind power accommodation in the background of “Internet+” strategy

The consumption of fossil fuel has resulted in global warming, environmental pollution, and many other crucial problems. Replacing fossil fuel with renewable energy has become an important issue over the recent decades. As a renewable clean energy, wind power is a relatively well‐developed and promising energy method for current technology development in China. Under the background of growing demand for electricity and enhancing awareness for environmental, the “Internet+ wind power” concept has emerged based on both the wind power's characteristics that renewable and non‐polluting, and the rapid development of the Internet in China. Through querying an amount of literature and information, this paper reveals the resource endowment and policy environment about wind power and energy Internet at first. Then, the PEST‐SWOT strategy analysis model is used to analyze the internalities (strengths and weaknesses) and the externalities (opportunities and threats) of “Internet+ wind power”. According to these results, the paper puts forward some measures (development and utilization, business mode) for wind power accommodation. Then some policy recommendations have been proposed. The government should provide favorable conditions for wind power grid with the “Internet+” technology innovation.     

基于博弈分析的流域水资源配置

针对传统规划方法难以体现水资源配置过程中多种复杂因素的问题,基于博弈理论建立宏观调控和市场经济相结合的水资源配置动态博弈模型,求解其子博弈精炼纳什均衡下各博弈参与人的策略,并运用改进量子遗传算法求解该博弈模型。对A河流域水资源配置结果表明,在保证流域公共生态用水2.0×10~8 m~3的基础上,各用水子区自发约束自身的取水量,达到均衡时,社会总收益为11.27亿元,相比自由取水模型,社会总收益增加了0.95亿元,增幅为9.2%。     

Optimization of three-dimensional boiling enhancement structure at evaporation surface for high power light emitting diode

A theoretical model of phase change heat sink was established in terms of thermal resistance network. The influence of different parameters on the thermal resistance was analyzed and the crucial impact factors were determined. Subsequently, the forming methods including ploughing–extrusion and stamping method of boiling enhancement structure at evaporation surface were investigated, upon which three-dimensional microgroove structure was fabricated to improve the efficiency of evaporation. Moreover, the crucial parameters related to the fabrication of miniaturized phase change heat sink were optimized. The heat transfer performance of the heat sink was tested. Results show that the developed phase change heat sink has excellent heat transfer performance and is suitable for high power LED applications.     

An up to date review of continuously variable speed wind turbines with mechatronic variable transmissions

As a promising and potential alternative to conventional fixed or variable speed wind turbines, continuously variable speed wind turbines (CVSWTs) with variable transmissions offer improved power efficiency and enhanced power control capabilities. The CVSWTs can be generally achieved by adapting mechatronic variable transmissions in the turbine drive train for continuously variable speed operations for wind turbines. Therefore, this paper serves to provide an up to date and exhaustive review of the CVSWTs with mechatronic variable transmissions such as mechanical variable transmission, electrical variable transmission, and power splitting transmission. In this paper, the analysis of CVSWTs with different mechatronic transmission topologies is performed regarding basic configurations, dynamic characteristics, control principles, and experimental or simulation results. Review results indicate the feasibility of applying CVSWTs with such mechatronic transmissions and highlight superiorities of the CVSWTs with power splitting transmission. The CVSWT with power splitting transmission will be particularly suitable for megawatt‐scale turbine systems and will hence increase the economic competitiveness of these turbines due to its large power capacity and high reliability. The directions or challenges for future investigations of CVSWTs with such mechatronic transmissions are also presented to foster in‐depth understanding of such CVSWTs and their control strategies.     

The emission characteristics of a petrol–ethanol–diethyl-ether blend as a carbon monoxide reduction additive in spark ignition engine

The emission characteristics of a petrol–ethanol–diethyl-ether blend as a carbon monoxide reduction additive in a spark ignition (SI) engine is presented. The experimental set-up is consisting of a Villiers G200, 6.5?hp, 4-stroke; single cylinder SI engine. The blend used was synthesised using petrol, ethanol and diethyl ether in the following percentage proportion by volume as 75:15:10, 60:25:15, 80:15:5, 85:10:5, respectively. These blends were tested at full engine load and at an operational speed of 2500?rpm. Exhaust emission probe was inserted at the exhaust pipe in order to determine the emission characteristics of these blends under different operating conditions. The results obtained during the emission test carried out show that CO emission level of petrol is higher than that of any of the blends with the 60:25:15 blends having the least emission level. The lowest CO emission of the blend is due to the high oxygen content of fuel blend. The above result shows a great promise in the fight against carbon oxide emission.     

A Voltage Control Method for a Distributed Line Feeder by means of Multiagent Approach

This paper proposes a method for the coordinated control of power factor by means of a multiagent approach. The proposed multiagent system consists of two types of agent: single feeder agent (F_AG) and bus agent (B_AG). In the proposed system, an F_AG plays as an important role, which decides the power factors of all distributed generators by executing the load flow calculations repeatedly. The voltage control strategies are implemented as the class definition of Java into the system. In order to verify the performance of the proposed method, it has been applied to a typical distribution model system. The simulation results show that the system is able to control very violent fluctuation of the demands and the photovoltaic (PV) generations.     

Estimation of power density in IMPATT using different materials

ABSTRACT

The RF output power dissipated per unit area is calculated using Runge-Kutta method for the high-moderate-moderate-high (n⁺-n-p-p⁺) doping profile of double drift region (DDR)-based impact avalanche transit time (IMPATT) diode by taking different substrate at Ka band. Those substrates are silicon, gallium arsenide, germanium, wurtzite gallium nitride, indium phosphide and 4H-silicon carbide. A comparative study regarding power dissipation ability by the IMPATT using different material is being presented thereby modelling the DDR IMPATT diode in a one-dimensional structure. The IMPATT based on 4H-SiC element has highest power density in the order of 10¹⁰ Wm^?2 and the Si-based counterpart has lowest power density of order 10⁶ Wm^?2 throughout the Ka band. So, 4H-SiC-based IMPATT should be preferable over others for the power density preference based application. This result will be helpful to estimate the power density of the IMPATT for any doping profile and to select the proper element for the optimum design of the IMPATT as far as power density is concerned in the Ka band. Also, we have focused on variation of power density with different junction temperatures and modelled the heat sink with analysis of thermal resistances.     

小型煤矿低浓度瓦斯发电技术及应用效果研究

针对云南富源县辖区内大量小型煤矿抽采的低浓度瓦斯未开展有效利用的问题，以区内某小型煤矿为背景，采用现场调研、分析归纳、理论计算相结合的方法对其低浓度瓦斯发电项目展开分析研究。研究表明，某小型煤矿低浓度瓦斯发电项目成功的关键是“瓦斯治理先行”理念主导下的气源保障综合技术体系。在气源得以保障的基础上，该小型煤矿低浓度瓦斯发电项目已经持续高效运行4年，每年创造经济收益约403.2万元，减排CO2约4.47万t；同时促进了煤矿瓦斯治理工作有效落实，提高了煤矿安全生产水平，保障了煤矿产量的达标。     

Heat Transfer Analysis of MHD Power Law Nano Fluid Flow through Annular Sector Duct

Flow and heat transfer analysis of an electrically conducting MHD power law nano fluid is carried out through annular sector duct,under the influence of constant pressure gradient.Two types of nano particles(i.e.Cu and TiO2)are used in power law nano fluid.Strongly implicit procedure,(SIP)is used to simulate the discretized coupled algebraic equations.It has been observed that volume fraction of nano particles,ϕand magnetic field parameter,Ha are favourable for the heat transfer rate,however,both resist the fluid flow.Impact of applied uniform transverse magnetic field exceeds in the case of shear thickening fluids(i.e.n>1)by increasing the value of Ha as compared to that in shear thinning fluids(i.e.n<1).Therefore,enhancement in heat transfer rate is comparably more in shear thickening fluid.Furthermore,comparable limiting case study with published result is also carried out in this research paper.     

基于峰谷分时电价的虚拟电厂日前申报及运行优化

鉴于分布式能源的出力性质为间歇性和波动性,影响电网安全高效运行,而虚拟电厂可解决此问题。对虚拟电厂进行申报-调度两阶段建模,以包含分布式电源(光电、风电和燃气轮机)和储能系统(储能电池)两大类分布式能源的虚拟电厂为例,基于光照强度及风速等不确定因素,研究峰谷分时电价下日前市场虚拟电厂的出力申报和运行调度策略并利用风险价值模型进行风险管理。结果表明,申报出力时,当电价激励足够高时储能电池方会参与出力,成功起到削峰填谷的作用;运行调度时,平衡出力偏差方面,储能电池发挥主要作用,且虚拟电厂运行调度策略具有一定的经济效益。